How to Select the Most Suitable Spot for Your Water Element

One of the first things to consider when selecting a water fountain is exactly where you want to put it. Any high-traffic locations such as driveways, entryways, or roundabouts are ideal spots to install one. twf029-ei__30264.1377264653.208.278_category.original.jpg

Certain fountains are specifically built to lean against a wall. They can be mounted against a wall, post, or fence by using a bar or a hook attached to the back. Bare in mind when you set up your fountain that you must securely fasten it to a wall to avoid having it fall over in high winds and being damaged.

A typical spot to add a garden sculpture is commonly in areas where people gather to sit back and enjoy the scenery.

Directions for Mounting a Wall Fountain

Improve nearly any space with the addition of a wall fountain. The effects of the water sounds include providing peace and calm to the room. People tend to hang wall fountains in any space where folks gather, but most commonly in foyers. Even though each model might have slight differences on how to install it, the basic guidelines are the same for all. There are normally several components that need to be put together.

First you should attach the bottom to the upper part, then connect the pump and the tubing. Remember to review the directions before getting started in order to avert problems. In general, it is simple and uncomplicated. Be aware, though, that the design you have might call for a somewhat different procedure. Do not hesitate to get someone to assist you to keep the wall fountain in the right place while you make a tiny mark on the wall. The easiest way to ensure it is mounted correctly is to use a level. It is recommended to mark both the bottom and the top positions. Your wall fountain can be mounted in one of two ways. You will find slots on the back side of the wall fountain which can be mounted directly onto the screws. Alternatively, brackets can be secured to the wall. This alternative tends to be recommended for heavy wall fountains. Mark the point on the wall where the brackets need to be attached. Make pilot holes in the wall for the drywall anchors.

Affix the anchors by correctly hammering them into the wall. The brackets can then be mounted on the wall utilizing a screwdriver or rechargeable drill. The wall fountain is all set to be mounted onto the brackets. Check to be certain it is both secure and level. Water can be added as soon as the fountain has been secured. Use sufficient water so that the pump is entirely submerged. Then plug it in and the water will start to move. Slowly pour in more water until it comes within an inch of the top of the basin. Note that it will overflow when not pumping if you fill it to the very top. The water level will rise because it all settles at the bottom of the basin if not being pumped. Whenever there is too much water, it will spill out and can harm your flooring and furnishings.

Outdoor Wall Fountains: The Numerous Styles Available

Small verandas or courtyards are an ideal place to install wall fountains because they add style to an area with limited space.

When considering the many types of outdoor wall fountains available including traditional, antique, contemporary, or Asian, you are certain to find one most suitable to your design ideas. Your preferences dictate the type you buy so while there may not be a prefabricated fountain to satisfy you, you do have the option of having a customized one.

There are two specific styles of fountains you can buy: mounted and stand-alone. Small, self-contained versions can be hung on a wall are called mounted wall fountains. Wall fountains made of resin ( similar to stone) or fiberglass are typically lightweight so they can be easily hung. Stand-alone fountains, often referred to as floor fountains, are sizable, have a basin located on the ground and a smooth side which leans against a wall. There are no weight constraints on these sorts of cast stone water features.

Custom-made fountains which can be integrated into a new or existing wall are often recommended by landscaping designers. The basin and all the required plumbing are best installed by a trained mason. The wall will need to have a spout or fountain mask built into it. If you want a cohesive look for your garden, buy a customized wall fountain because it becomes part of the scenery rather than an afterthought.

The Myriad Reasons to Include a Wall Fountain

The area outside your residence can be enhanced by adding a wall or a garden fountain to your landscaping or garden project. Historical fountains and water features have sparked the notice of modern-day designers as well as fountain manufacturers. As such, integrating one of these to your home design is a superb way to connect it to the past. Among the many attributes of these beautiful garden fountains is the water and moisture they discharge into the air which attracts birds and other wild life as well as helps to balance the ecosystem. Birds enticed by a fountain or bird bath often frighten off irksome flying pests, for instance.

Putting in a wall fountain is your best option for a little backyard because a spouting or cascading fountain takes up too much space. Two options to choose from include either a freestanding type with an even back set against a fence or wall in your backyard, or a wall-mounted, self-contained type which hangs on a wall. A fountain can be added to an existing wall if you include some type of fountain mask as well as a basin to gather the water below. The plumbing and masonry work necessary for this kind of job requires know-how, so it is best to hire a skilled person rather than go at it yourself.

The Advantages of Installing an Indoor Wall Water Fountain

One way to accentuate your home with a modern twist is by adding an indoor wall fountain to your living area. Installing this sort of fountain in your home or office permits you to create an area for your loved ones and clientele where there is little noise as well as minimal stress and maximum relaxation. Installing one of these interior wall water features will also gain the attention and appreciation your staff and clients alike. All those who come near your indoor water feature will be amazed and even your most difficult detractor will be dazzled.

While sitting under your wall fountain you can revel in the serenity it provides after a long day's work and enjoy watching your favorite sporting event. Anyone close to an indoor fountain will benefit from it because its sounds emit negative ions, remove dust and pollen from the air, and also lend to a soothing environment.

Installation and Maintenance of Garden Fountains

A crucial first step before installing any outdoor wall fountain is to consider the area you have available. It will require a solid wall to support its total weight. So spaces or walls which are smaller in size will most probably require something lightweight. You will need to have an electrical plug in proximity to the fountain so it can be powered. Most outdoor wall fountains come with simple, step-by-step instructions according to the type of fountain.

The typical outdoor wall feature is available in an easy-to-use kit that comes with everything you need and more to properly install it. A submersible pump, hoses and basin, or reservoir, are provided in the kit.

If the size is average, the basin can be concealed among your garden plants. Other than the regular cleaning, little upkeep is required once your outdoor wall fountain is fitted.

Change the water frequently so it is always clean. It is important to promptly get rid of debris such as leaves, twigs or other dreck. In addition, your outdoor wall fountain should not be subjected to freezing winter weather. Your pump may split when subjected to freezing water during the cold weather, so it is best to bring it indoors to prevent any damage. To sum up, your outdoor wall fountain will continue to be an amazing add-on to your garden if you keep it well cared for and well maintained.

The Captivating Roots of the Fountain

During his reign (1397-1455) of the Roman Catholic Church, the learned Pope Nicholas V commissioned countless of translations of ancient Greek classics into Latin. Turning the city into the worthy capital of the Christian community was important to him, so he also took steps to embellish it. Beginning in 1453, the ruined Aqua Vergine, an ancient Roman aqueduct which had brought clean drinking water into the city from many miles away, underwent reconstruction at the bidding of the Pope. Nicholas V also revived the Roman convention of installing lavish fountains, referred to as mostras, to mark the end point of the aqueduct. The fascinating origins of the Trevi Fountain go back to an older water fountain he had commissioned to the architect Leon Battista Alberti. The changes, as well as the extensions included in the restored aqueduct, ultimately made it possible to provide the Trevi Fountain and the well-known baroque fountains in the Piazza del Popolo and Piazza Navona with the necessary water to function.

The Spectacle of Water On The Outdoor Wall: A Fountain

A wall fountain can be an important design element in your home or workplace, enough so that it leaves a good impression on your family and friends alike. Having a wall water feature in your daily life not only stimulates the eyes with its splendor but also your ears with the soothing background sounds it generates. Guests will walk away with a memorable impression of the pleasing sights and relaxing sounds eminating from it.

A wall fountain can add a great deal of elegance, even to modern living areas. Stainless steel or glass are two of the materials used to construct modern-day types which add a stylish component to your interior design. Is space limited in your home or business? The best choice for you is a wall water fountain. Since they are mounted on a wall you can save your precious real estate for something else. Commercial buildings with busy lobbies commonly have one of these fountains. Indoor spaces are not the only places to hang a wall fountain, however. Consider using fiberglass or resin for your outside wall water feature. Liven up your yard, patio, or other outdoor space with a water fountain made of these waterproof materials.

There is wide range of distinctive styles in wall fountains ranging from the modern to classic and rustic. The type most suitable for your living space depends only on your personal design ideas. The materials utilzed to decorate a mountain lodge differ from that needed to beautify a high-rise apartment, the former perhaps requiring slate and the latter better served with sleek glass. The material you select depends solely on your design ideas. Fountains are features which no doubt impress people who visit your home.

The Genesis Of Outdoor Fountains

The incredible architecture of a fountain allows it to provide clean water or shoot water high into air for dramatic effect and it can also serve as an excellent design feature to complete your home.

Originally, fountains only served a practical purpose. Residents of urban areas, townships and small towns utilized them as a source of drinking water and a place to wash, which meant that fountains needed to be connected to nearby aqueduct or spring. Up to the late 19th century, water fountains had to be near an aqueduct or reservoir and more elevated than the fountain so that gravity could make the water flow down or jet high into the air. Fountains were an optimal source of water, and also served to decorate living areas and celebrate the artist. Roman fountains usually depicted images of animals or heroes made of bronze or stone masks. Muslims and Moorish garden designers of the Middle Ages included fountains to re-create smaller versions of the gardens of paradise. Fountains enjoyed a significant role in the Gardens of Versailles, all part of French King Louis XIV’s desire to exercise his power over nature. The Romans of the 17th and 18th centuries created baroque decorative fountains to exalt the Popes who commissioned them as well as to mark the location where the restored Roman aqueducts entered the city.

The end of the nineteenth century saw the rise in usage of indoor plumbing to supply drinking water, so urban fountains were relegated to strictly decorative elements. Impressive water effects and recycled water were made possible by switching the force of gravity with mechanical pumps.

Decorating city parks, honoring people or events and entertaining, are some of the purposes of modern-day fountains.


Fountains: The Minoan Society
On the Greek island of Crete, digs have discovered channels of numerous sorts. These provided water and extracted it, including water from waste and deluges. They were typically created from clay... read more
Fountains And Their Use In Crete & Minoa
Fountains and Water and the Minoan Civilization These were used to supply cities with water as well as to reduce flooding and remove waste. Stone and clay were the ingredients of... read more
The Early Culture: Fountains
Fountains and Water and the Minoan Civilization They not solely aided with the water supplies, they removed rainwater and wastewater as well. They were... read more
Modern Garden Decoration: Outdoor Fountains and their Roots
Modern-day fountains function mostly as decoration for community spaces, to honor individuals or events, and enhance entertainment and recreational events. read more
The Origins Of Fountains
Contemporary fountains are used to embellish public spaces, honor individuals or events, and enrich recreational and entertainment events. read more