A Few Good Techniques to Mount a Wall Water Feature

Make any living space better with a wall fountain. A waterfall will bring a sense of peacefulness with the comforting sounds of moving water. twf036-ei__22446.jpg People tend to hang their wall fountains in foyers, but, in fact, they can be a wonderful addition to any room where everyone meets. Although the instructions for hanging one are fairly straightforward there will be slight variations depending on the model. There are usually several pieces that need to be assembled. You should first attach the base to the upper section, then connect the pump and the tubing. The directions should be read first to make sure it is set up correctly. It is typically a straight-forward procedure. Note, however, that the instructions for your individual model can vary slightly. Do not hesitate to get someone to assist you to position the wall fountain in the right spot while you make a small mark on the wall. The simplest way to ensure it is hung correctly is to use a level. Mark the wall where you want the top of the wall fountain as well as the base. Wall features can be hung in more than one way. You will see slots on the back side of the wall fountain which can be mounted directly onto the screws. Alternatively, you might want to affix brackets to the wall and use those. This last one is the more advisable way, especially if your fountain is large. Mark the point on the wall where the brackets need to be mounted. Use a drill to make the pilot holes on the wall for the drywall anchors. Gently hammer the anchors into the wall. Hold the brackets in position on the wall and use a wireless drill or screwdriver to mount them.

It is now time to put your wall fountain onto the mounting brackets. Ensure that it is firmly installed and straight. When you are sure the unit is secure, fill with water. There will need to be adequate water to cover the water pump. Now plug it in and the water will start to circulate. Slowly add just enough water to reach one inch below the top edge of the basin. Note that it will overflow when not pumping if you fill it to the top. Whenever the water is not being pumped, it all settles at the bottom part which causes the water level to rise. Harm can be be the result if the water is overly full and spills down your wall.

Installing a Fountain In Smaller Yards

Since water is reflective, it has the effect of making a smaller space appear larger than it is. Dark materials alter the refractive properties of a fountain or water feature. If your purpose is to showcase your new feature at night, underwater lights in varied colors and shapes will do the trick. The sun is required to power eco-lights during the day time while underwater lights are great for night use. The comforting effect produced by these is oftentimes used in nature therapies to alleviate anxiety and stress.

The greenery in your garden is the perfect place to place your water feature. People will be focused on the pond, artificial river or fountain in your yard. Small verandas or major gardens is the perfect place to install a water feature. Considerably modifying the ambience is possible by placing it in the most appropriate place and include the finest accompaniments.

The Genesis Of Wall Fountains

A water fountain is an architectural piece that pours water into a basin or jets it high into the air in order to provide drinking water, as well as for decorative purposes.

Originally, fountains only served a functional purpose. People in cities, towns and villages received their drinking water, as well as water to bathe and wash, from aqueducts or springs in the area. Up until the 19th century, fountains had to be more elevated and closer to a water source, including aqueducts and reservoirs, in order to benefit from gravity which fed the fountains. Fountains were an optimal source of water, and also served to decorate living areas and celebrate the artist.

Roman fountains often depicted images of animals or heroes made of bronze or stone masks. Muslims and Moorish garden designers of the Middle Ages included fountains to re-create smaller models of the gardens of paradise. To show his prominence over nature, French King Louis XIV included fountains in the Garden of Versailles. The Romans of the 17th and 18th centuries created baroque decorative fountains to exalt the Popes who commissioned them as well as to mark the spot where the restored Roman aqueducts entered the city.

The end of the 19th century saw the increase in usage of indoor plumbing to provide drinking water, so urban fountains were relegated to strictly decorative elements. Gravity was substituted by mechanical pumps in order to permit fountains to bring in clean water and allow for amazing water displays.

Embellishing city parks, honoring people or events and entertaining, are some of the uses of modern-day fountains.

What Are Outdoor Garden Fountains Made From?

While today’s garden fountains are made in a number of materials, the majority are crafted from metal. Metallic versions offer clean lines and unique sculptural accents and will fit in with nearly any decorative style and budget. The interior design of your house should determine the look and feel of your yard and garden as well.

At present, copper is extremely common for sculptural garden fountains. Copper is appropriate for many fountain styles, including tabletop and cascade water fountains, and can be placed either inside or outside - making it a great option. Copper is also flexible enough that you can choose a range of styles for your fountain, from contemporary to whimsical.

Brass water fountains are also popular, although they tend to have a more conventional look than copper ones. You will see a lot of brass fountains, as their intricate artwork makes them trendy even if they are on the more traditional side.

Most people today see stainless steel as the most modern alternative. If you select a cutting-edge steel design, both the value and tranquility of your garden will get a nice lift.

As with all fountains, you can find any size you need.

Fiberglass is a widely used material for fountains because you can get the look and feel of metal at a much lower price, and it is lighter weight and easier to move than metal. The cleaning of fiberglass water fountains is quite simple, so they have many benefits that people appreciate.

The Elegance of Simple Garden Decor: The Landscape Fountain

Nowadays you can just put your garden water fountain near a wall since they no longer need to be hooked to a pond. Nowadays, you can eliminate digging, complicated installations and cleaning the pond. Due to its self-contained quality, this feature no longer needs plumbing work. Consistently adding water is the only necessity. Clear away the water from the bowl and place clear water in its place when you see that the area is unclean.

Any number of materials can be utilized to build garden wall fountains, but stone and metal are the most convenient. You must know the look you are shooting for in order to select the best suited material. Outdoor wall fountains come in many shapes and sizes, therefore ensure that the design you choose to buy is hand-crafted, simple to hang and lightweight. The fountain you choose needs to be easy to maintain as well. Even though installing certain fountains can be challenging, the majority take little effort because the only parts which demand special care are the re-circulating pump and the equipment to hang them. Little effort is needed to liven up your garden with these kinds of fountains.

Outdoor Garden Fountains And Their Use In Crete & Minoa

Various sorts of conduits have been found through archaeological digs on the island of Crete, the cradle of Minoan society. They were used for water supply as well as removal of storm water and wastewater. Rock and terracotta were the ingredients of choice for these conduits. Whenever terracotta was used, it was frequently for waterways as well as water pipes which came in rectangle-shaped or circular shapes. The cone-like and U-shaped terracotta pipes that were discovered haven’t been found in any other culture. Clay piping were employed to distribute water at Knossos Palace, running up to three meters beneath the floor surfaces. These Minoan pipelines were additionally utilized for collecting and stocking water, not just distribution.

This required the clay pipes to be suitable for holding water without seepage. Underground Water Transportation: This particular system’s undetectable nature may mean that it was initially created for some kind of ritual or to circulate water to restricted groups. Quality Water Transportation: The conduits may furthermore have been used to carry water to water fountains that were different from the city’s standard process.

Setting Up and Maintaining Large Garden Fountains

Setting up an outdoor wall fountain requires that you take into account the dimensions of the space where you are going to put it. A strong wall is absolutely needed to hold up its total weight. Note that small areas or walls will need to have a lightweight fountain. You will need to have an electrical outlet in the vicinity of the fountain so it can be powered. Since there are many varieties of outdoor wall fountains, installation methods vary, but the majority include user-friendly instructions.

The general outdoor wall fountain is available in an easy-to-use kit that comes with everything you need and more to properly install it. In the kit you are going to find all the needed elements: a submersible pump, hoses and basin, or reservoir. Depending on its size, the basin can typically be hidden quite easily amongst the plants. Once your wall fountain is installed, all that is needed is regular cleaning and some light maintenance.

Replenishing and cleaning the water on a routine basis is very important. Debris such as twigs, leaves or dirt should be cleaned up quickly. Make sure that your outdoor wall fountain is shielded from bitterly cold winter temperatures. If kept outdoors, your pump could crack as a result of frigid water, so bring it inside during the winter. Simply put, your outdoor fountain will be a part of your life for many years with the proper care and maintenance.

Backyard Fountains A Definition

The motion of water streaming in or through a large feature is what defines of a water feature. There is a wide array of such features going from something as simple as a hanging wall fountain or as elaborate as a courtyard tiered fountain. The versatility of this feature is useful due to the fact that it can be placed indoors or outdoors. Water features entail ponds and pools as well.

A garden wall fountain can be a beneficial water element to add to any yard, yoga studio, patio, balcony, or workplace. There is nothing better to relax you while also stimulating your senses of sight and hearing than the pleasing sounds of slowly trickling water in your fountain. Their aesthetically attractive shape accentuates the interior design of any room. Softly moving water not only results in a sense of peace, it also masks bothersome noises and produces an enchanting water show.

Exterior Wall Fountains: The Numerous Styles Available

If you want to create a place to relax as well as add some flair to a small area such as a patio or courtyard, wall fountains are ideal because they do not occupy much space. Whatever style of outdoor wall fountain you are looking for whether it be traditional, modern, classic, or Asian you will certainly find the one you like most. It is possible to have one customized if you are not able to find a prefabricated fountain to suit you.

The two kinds of water features available to you include mounted and freestanding models. Small, self-contained mounted wall fountains can be hung on any surface. One of the most important aspects of wall fountains is that they be lightweight, so they are typically made of fiberglass or resin to mirror the look of stone. Large-sized free-standing wall fountains, commonly referred to as floor fountains, have their basins located on the floor and a smooth side leaning on a wall. There are no weight restrictions on these sorts of cast stone water features.

Customized fountains which can be integrated into a new or existing wall are often prescribed by landscaping designers. The basin and all the necessary plumbing are best installed by a trained mason. It is also necessary to add a spout or fountain mask to build it into the wall. Custom-built wall fountains contribute to a unified look because they become part of the scenery rather than look like a later addition.


Historic Crete & The Minoans: Water Fountains
During archaeological excavations on the island of Crete, a variety of types of channels have been discovered. These were utilized to supply cities with water as well as to reduce flooding and get rid of waste. They were typically built from terracotta or stone. ... read more
From Where Did Landscape Fountains Begin?
Modern fountains are used to embellish public spaces, honor individuals or events, and enrich recreational and entertainment events. read more
Discover Tranquility with Outdoor Fountains
Simply having water in your garden can have a considerable effect on your health. The noise in your community can be masked by the soft sounds of a fountain. The outdoors and recreation are two of the things you will find in your garden. Water... read more