The Genesis Of Outdoor Fountains

A fountain, an incredible piece of engineering, not only supplies drinking water as it pours into a basin, it can also launch water high into the air for an extraordinary effect.

The main purpose of a fountain was originally strictly practical. brk-345__75023.jpg Residents of urban areas, townships and small towns used them as a source of drinking water and a place to wash, which meant that fountains needed to be linked to nearby aqueduct or spring. Up to the late nineteenth century, water fountains had to be near an aqueduct or reservoir and higher than the fountain so that gravity could make the water move downwards or shoot high into the air. Artists thought of fountains as amazing additions to a living space, however, the fountains also served to supply clean water and celebrate the designer responsible for creating it. Animals or heroes made of bronze or stone masks were often utilized by Romans to decorate their fountains. Muslims and Moorish garden designers of the Middle Ages included fountains to re-create smaller models of the gardens of paradise. King Louis XIV of France wanted to illustrate his superiority over nature by including fountains in the Gardens of Versailles. The Popes of the 17th and 18th centuries were glorified with baroque style fountains made to mark the arrival points of Roman aqueducts.

Urban fountains made at the end of the nineteenth served only as decorative and celebratory ornaments since indoor plumbing provided the essential drinking water. The introduction of special water effects and the recycling of water were two things made possible by swapping gravity with mechanical pumps.

These days, fountains decorate public areas and are used to pay tribute to individuals or events and fill recreational and entertainment needs.

Outdoor Elegance: Garden Water fountains

Since garden water fountains are no longer dependent on a nearby pond, it is possible to place them close to a wall. In addition, it is no longer necessary to dig, deal with a difficult installation process or clean the pond. Due to its self-contained quality, this feature no longer requires plumbing work.

Consistently adding water is the only requirement. Your pond should always contain fresh water, so be sure to empty the bowl whenever it gets dirty.

Stone and metal are most prevalent elements employed to construct garden wall fountains even though they can be made of other materials as well. The design you are looking for determines which material is best suited to meet your wishes. It is best to look for exterior wall fountains which are uncomplicated to install, handmade and lightweight. The water feature you buy must be simple to maintain as well. The re-circulating pump and hanging hardware are usually the only parts which need additional care in most installations, although there may be some cases in which the installation is a bit more complicated. Little exertion is needed to liven up your garden with these kinds of water features.

Wall Water Fountains: So Many Choices Available to You

A garden wall fountain is ideal when you do not have much space available. These lovely decorations can be mounted quite effortlessly on any wall and are space-efficient. There are so many different price ranges and models so that everyone can find their perfect fit. You can pick from an array of colors and sizes as well. These lovely water fountains are also common with anyone looking to add some pizzazz to their outdoor decor. You can even get more than one fountain for an interesting waterfall sound if you have enough space on your wall.

Garden fountains come in a large range of options from which to select. The model you want and where to install it are the first things to figure out.

Ancient Crete & The Minoans: Fountains

On the Greek island of Crete, digs have unearthed conduits of different varieties. These provided water and extracted it, including water from waste and deluges. Virtually all were created from clay or rock.

There were clay pipelines, both circular and rectangle-shaped as well as canals made from the same material. Amidst these were clay pipes that were U-shaped or a shortened, cone-like form which have only appeared in Minoan culture. Clay pipelines were used to circulate water at Knossos Palace, running up to three meters directly below the flooring. These Minoan pipelines were also made use of for amassing and stocking water, not just circulation. These clay piping were used to perform: Underground Water Transportation: At first this particular process appears to have been designed not quite for convenience but rather to supply water to chosen people or rites without it being observed. Quality Water Transportation: There is also proof which concludes the pipelines being utilized to feed fountains independently from the domestic technique.

Interior Wall Water Elements are Ideal for House or Office

One way to enhance your home with a modern twist is by installing an indoor wall fountain to your living area. Your home or office can become noise-free, worry-free and peaceful areas for your family, friends, and clients when you have one of these fountains. Your employees and clients alike will take notice and complement your new indoor wall water feature. Your indoor water element will undoubtedly capture the attention of all those in its vicinity, and stymie even your most demanding critic as well.

While sitting underneath your wall fountain you can indulge in the tranquility it provides after a long day's work and enjoy watching your favorite sporting event. The rewards of an indoor water feature include its ability to emit negative ions with its gentle sounds and eliminate dust and pollen from the air while creating a calming setting.

Setting Up and Maintaining Large Outdoor Fountains

An important facet to think about is the size of the outdoor wall fountain in respect to the space in which you are going to install it. It will need a solid wall to support its overall weight. Also keep in mind that smaller areas or walls will require a lightweight fountain. An electrical socket near the fountain is needed to power the fountain. Since there are many varieties of outdoor wall fountains, installation methods vary, but the majority include user-friendly instructions.

The typical outdoor wall fountain is available in an easy-to-use kit that comes with everything you need and more to properly install it. In the kit you will find all the needed elements: a submersible pump, hoses and basin, or reservoir. The basin, if it's not too large, can easily be concealedin your garden among the plants. Once your wall fountain is installed, all that is required is consistent cleaning and some light maintenance.

It is vital to replenish the water regularly so that it remains clean.

Rubbish such as branches, leaves or dirt should be cleaned up quickly. Safeguarding your outdoor wall fountain from the cold winter temperatures is essential. Bring your pump inside when the weather turns very cold and freezes the water so as to avoid any possible damage, such as cracking. To sum up, your outdoor wall fountain will continue to be an amazing addition to your garden if you keep it well cared for and well maintained.

Tips for Selecting the Ideal Water Feature for Your Needs

One of the first things to consider when selecting a water fountain is exactly where you intend to put it. Roundabouts and driveways are ideal spots for them.

Certain fountains are especially made to lean against a wall. They can be mounted against a wall, post, or fence by using a bar or a hook fastened to the back. Since the top part of your fountain is unstable on its own, ensure that it is secure against a wall to avoid damage caused by strong winds, wild animals, or other natural threats.

A frequent spot to add a garden sculpture is commonly in areas where people come together to sit back and enjoy the scenery.

The Various Construction Materials of Garden Fountains

Though they come in different materials, contemporary garden fountains tend to be made of metal. Metallic models offer clean lines and unique sculptural accents and will fit in with nearly any decorative style and budget. The interior design of your house should establish the look and feel of your yard and garden as well.

At present, copper is quite prevalent for sculptural garden fountains. Copper is appropriate for many fountain styles, including tabletop and cascade water fountains, and can be placed inside or outside - making it a great choice. Copper fountains also come in a huge array of designs - from fun and eccentric to modern and cutting-edge.

If you are drawn to more traditional -looking water fountains, brass is probably the best option for you.

Though not the most stylish, the creatures and sculptural features you find on fountains are commonly made of brass, thus making them very popular.

Of all the metals, stainless steel is recognized as the most contemporary-looking. A modern steel design will quickly increase the value of your garden as well as the feeling of peacefulness. As with most fountains, they are available in numerous sizes.

Fiberglass fountains are popular because they look similar to metal but are more affordable and much easier to move around. Keeping a fiberglass water fountain clean and working correctly is quite effortless, another aspect consumers like.

Outdoor Wall Fountains: The Numerous Styles Available

If you want to have a place to relax and add some flair to a small area such as a patio or courtyard, wall fountains are perfect because they do not take up much space. The myriad of designs in outdoor wall fountains, including traditional, classic, contemporary, or Asian, means that you can find the one suitable to your tastes. Your preferences dictate the type you buy so while there may not be a prefabricated fountain to satisfy you, you do have the option of having a custom made one.

There are two distinct sorts of fountains you can buy: mounted and stand-alone. Small, self-contained mounted wall fountains can be hung on any surface. One of the most important features of wall fountains is that they be light, so they are typically made of fiberglass or resin to mirror the look of stone. Large-sized free-standing wall fountains, often referred to as floor fountains, have their basins located on the floor and a smooth side leaning on a wall. Water features such as these are ordinarily made of cast stone and have no weight restrictions.

It is a good idea to incorporate a customized fountain into a new or existing wall, something often recommended by landscape experts. Placing the basin against the wall and installing all the plumbing work requires a expert mason to do it correctly. A fountain mask or a spout also needs to be incorporated into the wall. If you want a cohesive look for your garden, buy a customized wall fountain because it becomes part of the scenery rather than an afterthought.


A Glimpse into the Beginnings of Fountains
The Roman scholar Pope Nicholas V (1397-1455) decided to have hundreds of old Greek writings translated into Latin. In addition, embellishing the city and making... read more
The Positive Benefits of installing a wall fountain in Your Living Area
Putting in a wall fountain is your best option for a little garden because a spouting or cascading fountain occupies too much space. Either a stand-alone fountain with an... read more
The Wide Array of Styles of Water Wall Fountains
Landscape professionals often propose a individualized fountain for a brand new or existing wall. Installing the basin against the wall and installing all the plumbing work needs a professional mason to do it properly. A fountain mask or a... read more
Consider the Benefits of an Indoor Wall Water Feature
If you are searching for a water wall that best suits your families’ needs consider one of the many types available including a mounted waterfall, a stand-alone... read more