A Few Good Techniques to Mount a Wall Water Fountain

Just about any room will benefit from the addition of a wall fountain. A waterfall will bring a sense of tranquility with the comforting sounds of trickling water. Entryways are common places for wall fountains, but they can also be hung in any common space. The best way to hang one depends on the model, but the standard technique is the same. Set-up will include putting together a number of components. twf029-ei__30264.1377264653.208.278_category.original.jpg Once you connect the foundation and the top you will then need to attach the pump and the hoses. It is advisable to carefully check out the directions before you begin the assembly process. You should find the procedure relatively straightforward. Keep in mind, though, that each style might need a slight adjustment. Another person can be helpful to hold the wall fountain in the appropriate position so that you can mark the wall. A level is the ideal to ensure it is hung straight. It is advisable to mark both the bottom and the top placements. Wall fountains can be installed in more than one way. You can put the screws in the wall and slide them into the slots on the back of the wall fountain. Alternatively, you can attach brackets to the wall and use those. This last one is the more advisable technique, especially if your fountain is large. Decide where the brackets will be and then mark the precise spot on the wall. Drill pilot holes in the wall where you need to place the drywall anchors. Insert the anchors by carefully hammering them into the wall. Use a cordless drill or a screwdriver to install the brackets, making certain they are straight. The wall fountain is ready to be fitted onto the brackets. Ensure that it is firmly installed and straight. Add some water once the wall fountain is mounted. The pump should be completely submerged under water. The water will start to circulate as soon as you plug in your fountain. Slowly pour in more water until it comes within an inch of the top of the basin.

The basin will overflow when the pump is switched off if it’s too full, so be certain not to fill it completely. Whenever the water is not being pumped, it all settles at the bottom which causes the water level to rise. Whenever the fountain is overly full, water can spill out and cause damage to the surrounding area.

Pick from Any Number of Outdoor Wall Fountain Designs

If you want to have a place to relax as well as add some pizzazz to a small area such as a patio or courtyard, wall fountains are ideal because they do not take up much space. When looking at the many types of outdoor wall fountains available including traditional, vintage, contemporary, or Asian, you are certain to find one most suitable to your design ideas. It is possible to have one custom-made if you are not able to find a prefabricated fountain to suit you.

Depending on your needs, you can select from mounted or freestanding types. Small, self-contained mounted wall fountains can be installed on any surface. Normally made of resin (to look like stone) or fiber glass, these types of fountains are lightweight and easy to hang. Stand-alone fountains, often referred to as floor fountains, are sizable, have a basin positioned on the ground and a smooth side which leans against a wall. Water features such as these are usually manufactured of cast stone and have no weight restrictions.

Customized fountains which can be integrated into a new or existing wall are often prescribed by landscaping designers. The basin and all the required plumbing are best installed by a trained mason. You will need to integrate a spout or fountain mask into the wall. A tailor-made wall fountain blends into the landscape instead of standing out because it was a later addition, which contributes to a cohesive appearance.

Things to Keep in Mind When Determining Where to Put Your Water Element

One of the first things to ponder when picking a water fountain is exactly where you want to put it. They make striking centerpieces in roundabouts and make a lovely impression in driveways and entryways too.

If you choose to put yours against a wall, there are fountains designed specifically for this purpose. To secure one against a wall, look for a bar or hook on the back made specifically for this purpose. Since the top part of your fountain is not stable on its own, make certain that it is secure against a wall to avoid damage caused by strong winds, wild animals, or other natural threats.

Anywhere people come together to sit and enjoy the fresh air is ideal for another option, a garden sculpture style.

The Genesis Of Fountains

The incredible architecture of a fountain allows it to provide clean water or shoot water high into air for dramatic effect and it can also serve as an excellent design feature to enhance your home.

Pure functionality was the original role of fountains. Cities, towns and villages made use of nearby aqueducts or springs to provide them with drinking water as well as water where they could bathe or wash. Until the late 19th, century most water fountains functioned using gravity to allow water to flow or jet into the air, therefore, they needed a source of water such as a reservoir or aqueduct located higher than the fountain. Fountains were not only used as a water source for drinking water, but also to adorn homes and celebrate the artist who created it. The main materials used by the Romans to create their fountains were bronze or stone masks, mostly depicting animals or heroes. During the Middle Ages, Muslim and Moorish garden designers included fountains in their designs to re-create the gardens of paradise. Fountains enjoyed a significant role in the Gardens of Versailles, all part of French King Louis XIV’s desire to exert his power over nature. Seventeen and 18 century Popes sought to laud their positions by including beautiful baroque-style fountains at the point where restored Roman aqueducts arrived into the city.

Indoor plumbing became the main source of water by the end of the 19th century thereby restricting urban fountains to mere decorative elements. Fountains using mechanical pumps instead of gravity helped fountains to bring recycled water into living spaces as well as create unique water effects.

Contemporary fountains are used to adorn public spaces, honor individuals or events, and enrich recreational and entertainment events.

The Beginnings of Contemporary Outdoor Water Fountains

As the head of the Catholic Church, the scholarly Pope Nicholas V (1397-1455} decided to mandate translations of important texts from their original Greek into Latin. In addition, beautifying the city and making it the true capital of the Christian world was at the center of his ambitions. Beginning in 1453, the ruined Aqua Vergine, an historical Roman aqueduct which had brought clean drinking water into the city from many miles away, underwent repair at the behest of the Pope. In addition, the ancient Roman practice of marking the arrival point of an aqueduct with an grandiose celebratory fountain, also known as a mostra, was restored by Nicholas V. The Trevi Fountain now occupies the space previously filled with a wall fountain built by Leon Battista Albert, an architect employed by him. The water which ultimately supplied the Trevi Fountain, as well as the acclaimed baroque fountains in the Piazza del Popolo and Piazza Navona, came from the renovated and modified aqueduct.

Consider the Benefits of an Indoor Wall Water Fountain

Indoor fountains have been utilized for many years as useful elements to create soothing, worry-free environments for patients in clinics and wellness programs. People are entranced by the soothing sounds of softly moving water which can result in a state of internal contemplation.

Moreover, healing appears to go faster when water fountains are included as part of the healing process.

A number of illnesses are thought to get better with their use, as such they are suggested by medical professionals and mental health therapists. People with PTSD or sleeping disorders, as well as other medical conditions, are thought to recuperate better with the soothing, delicate sounds of flowing water.

An interior wall water element is believed to create an overall sense of wellness and security according to countless studies. The existence of water in our environment is vital to the existence of our species and our planet.

The transformative power of water has long been considered as one of two essential components used in the art of feng-shui. Harmonizing our interior environment so that it promotes relaxation and peace is one of the central tenets in feng-shui. Our homes need to include some sort of water element. The best place to set up a fountain is close to your home’s entrance or in front of it.

Whatever you decide on, whether a mounted waterfall, a stand-alone water feature, or a customized fountain, you can be certain that your brand new water wall will be advantageous to you and your loved ones. Many reports claim that a fountain located in a central living area makes people more cheerful, satisfied, and relaxed than those who do not have a fountain in the house.

Fountains: The Minoan Society

During archaeological excavations on the island of Crete, a variety of kinds of channels have been found.

These were applied to provide cities with water as well as to alleviate flooding and get rid of waste material. Most were created from clay or rock. There were clay conduits, both round and rectangle-shaped as well as canals made from the same elements. The cone-like and U-shaped clay piping that were uncovered have not been seen in any other culture. Knossos Palace had a advanced plumbing network made of terracotta piping which ran up to three meters under ground. These Minoan water lines were also made use of for amassing and stocking water, not just circulation. This called for the clay piping to be capable of holding water without seepage. Subterranean Water Transportation: It is not quite understood why the Minoans required to transport water without it being seen. Quality Water Transportation: There is also information that concludes the piping being utilized to provide for fountains separately of the domestic strategy.

The Various Construction Materials of Outdoor Garden Fountains

Garden fountains these days are mostly made from metal, though you can find them in other materials too. Those made from metals have clean lines and unique sculptural elements, and are versatile enough to fit any budget and decor. It is essential that your landscape design reflects the style of your residence.

One of the more trendy metals for sculptural garden fountains presently is copper. Copper fountains are the best choice because they are perfect for the inside and outside. Another benefit of copper fountains is they are flexible and come in a wide range of styles.

Brass water fountains are also common, though they tend to have a more conventional look than copper ones. Even though they are a bit old-fashioned, brass fountains are quite popular because they often incorporate interesting artwork.

The most contemporary metal right now is definitely stainless steel. A cutting-edge steel design will quickly raise the value of your garden as well as the feeling of serenity. Just like other water features, they come in an array of sizes.

For people who want the appearance of a metal fountain but desire a lighter weight and more affordable option, fiberglass is the answer. The cleaning of fiberglass water fountains is quite simple, so they have many merits that people appreciate.

Water Fountains As Water Features

A water feature is one which is a big element through which water moves. There is an extensive array of such features going from something as simple as a suspended wall fountain or as elaborate as a courtyard tiered fountain. These products are so adaptable that they can be placed outdoors or inside. Swimming pools and ponds are also considered water elements.

Living areas such as extensive yards, yoga studios, relaxing verandas, apartment balconies, or office settings are great areas to add a water feature such as a garden wall fountain. The soothing sounds of flowing water from a fountain please the senses of sight and hearing of anyone nearby. With their aesthetically pleasing form you can also use them to enhance the style in your home or other living area. The sound of water produces contentment, covers up undesirable noises and also provides an entertaining water show.


The Beauty of Simple Garden Decor: The Garden Fountain
Any number of materials can be utilized to make garden wall features, but stone and metal are the most frequently used. The most suitable material for your water feature depends... read more
The Various Construction Materials of Large Garden Fountains
Because it is both lighter and less expensive than metal but has a nearly identical look, fiberglass is quite common for fountains. Keeping a fiberglass water fountain clean and working properly is quite simple, another aspect consumers like. read more
Installing a Water Fountain In Smaller Gardens
Your outdoor vegetation is a fantastic place to blend in your water feature. Your pond, artificial waterway, or fountain is the perfect feature to draw people’s interest. Examples of areas where you can install a water feature ... read more
Outdoor Water Fountains A Definition
Look into placing a water feature such as a garden wall fountain to your expanisive backyard, yoga studio, comfy patio, apartment balcony, or office space. You can chill out to the softly cascading water in your fountain and gratify ... read more