The Innumerable Possibilities in Garden Wall Fountains

You can find tranquility and quiet when you add a wall fountain in your garden or patio. Moreover, it can be designed to fit into any wall space since it does not take up much room. Whether it is stand alone or fitted, you will require a spout, a water basin, internal piping, and a pump. There are many different varieties available on the market including traditional, contemporary, classical, or Asian. 53265ct__51863.jpg

With its basin laid on the ground, freestanding wall fountains, or floor fountains, are typically quite big in size.

On the other hand, a water feature attached to a wall can be integrated onto an existing wall or built into a new wall. Incorporating this type of water feature into your landscape brings a cohesiveness to the look you want to attain rather than making it seem as if the fountain was merely added later.

A Few Simple Ways to Install a Wall Water Element

Wall features can complement any space. The effects of the water sounds include providing serenity and calm to the room. Entryways are common places for wall fountains, but they can also be displayed in any common space. How to install one varies a bit depending on the model, but there are some general directions that apply to all of them. There are typically several components that need to be assembled. The bottom and the upper portion will need to be put together as well as the pump and the tubing. It is advisable to carefully look at the guidelines before you begin the assembly process. You will find the procedure relatively simple. Be aware, though, that the style you have might require a somewhat different procedure. Have a colleague hold the wall fountain in the desired spot, then mark the wall appropriately. The easiest way to make sure it is installed correctly is to use a level. Both the top and the lower part should be marked. Wall fountains can be installed in a couple of ways. The first is to utilize screws which you glide into the slots on the back. On the other hand, brackets can be fixed to the wall. The bracket alternative is best, specifically for wall fountains that are big and heavy. Determine where the brackets will be placed and then mark the precise location on the wall. Use a drill to make the pilot holes on the wall for the drywall anchors. Put the anchors in the wall with a hammer.

Hold the brackets in position on the wall and use a portable drill or screwdriver to attach them. Install your wall fountain by hanging it onto the brackets. Make sure that it is perfectly straight and not loose. Put in water once the wall fountain is mounted. The pump should be completely submerged under water. Plug the pump into the wall and watch the water begin to move. The water basin should be filled to about one inch below the top edge. Do not fill the basin all the way to the top or it will overflow whenever the pump is not on. Whenever the pump is turned off the water all settles at the bottom of the basin, causing the water level to rise. The water will overflow and cause property damage if the wall fountain is overly full.

Look at the Advantages of an Indoor Wall Water Fountain

Indoor fountains are a useful addition in hospitals and wellness clinics because they lend a peaceful, tranquil essence to them. Softly streaming water lulls people into a state of introspection.

The sounds created by interior water features are also thought to bolster the rate of recovery. They are believed to be a positive part of treating a variety of illnesses according to many medical professionals and mental health providers. The calming, melodious sound of moving water is thought to help those with PTSD and severe insomnolence.

A sense of security and well-being is heightened, according to quite a few studies, when you add an wall fountain in your home. Human beings, as well as this environment, could not survive without the sight and sound of water.

The transformative power of water has long been considered as one of two crucial components used in the art of feng-shui. The main precepts of feng-shui say that we can attain serenity and harmony by harmonizing the interior elements in our surroundings. We should have the element of water somewhere in our home. The ideal spot to install a fountain is near your home’s entrance or in front of it.

Whatever you choose, whether a mounted waterfall, a stand-alone water element, or a customized fountain, you can rest assured that your brand new water wall will be advantageous to you and your loved ones.

Many reports claim that a fountain located in a central living area makes people more cheerful, satisfied, and relaxed than those who do not have a fountain in the house.

Factors to Think About When Determining Where to Put Your Water Feature

Before choosing a water fountain, carefully consider precisely where you want to put it. They make beautiful centerpieces in roundabouts and make a wonderful impression in driveways and entryways too.

There are models such as wall fountains created especially to be positioned against a flat surface. They can be secured against a wall, post, or fence by using a bar or a hook affixed to the back. Such fountains are not stable on their own, therefore, be sure to secure it right away so that it does not topple over as a result of weather conditions, animals or other natural occurrences.

Anywhere people gather to sit and take in the fresh air is ideal for another option, a garden sculpture style.

The Origins Of Outdoor Fountains

The dramatic or decorative effect of a fountain is just one of the purposes it fulfills, in addition to delivering drinking water and adding a decorative touch to your property.

Pure practicality was the original role of fountains. Water fountains were connected to a spring or aqueduct to supply drinkable water as well as bathing water for cities, townships and villages. Used until the 19th century, in order for fountains to flow or shoot up into the air, their source of water such as reservoirs or aqueducts, had to be higher than the water fountain in order to benefit from the power of gravity.

Artists thought of fountains as wonderful additions to a living space, however, the fountains also served to supply clean water and honor the artist responsible for building it. The main materials used by the Romans to create their fountains were bronze or stone masks, mostly depicting animals or heroes. During the Middle Ages, Muslim and Moorish garden designers included fountains in their designs to re-create the gardens of paradise. The fountains found in the Gardens of Versailles were meant to show the power over nature held by King Louis XIV of France. The Romans of the 17th and 18th centuries manufactured baroque decorative fountains to exalt the Popes who commissioned them as well as to mark the spot where the restored Roman aqueducts entered the city.

Since indoor plumbing became the standard of the day for fresh, drinking water, by the end of the 19th century urban fountains were no longer needed for this purpose and they became purely decorative. Gravity was substituted by mechanical pumps in order to enable fountains to bring in clean water and allow for beautiful water displays.

These days, fountains decorate public spaces and are used to pay tribute to individuals or events and fill recreational and entertainment needs.

A Peek into the Origins of Outdoor Water Fountains

The Roman academic Pope Nicholas V (1397-1455) decided to have hundreds of historic Greek texts translated into Latin. In addition, beautifying the city and making it the worthy capital of the Christian world was at the center of his ambitions. In 1453 he initiated the repairing of the Aqua Vergine, an ancient Roman aqueduct which had carried clean drinking water into the city from many miles away.

In addition, the ancient Roman tradition of marking the arrival point of an aqueduct with an imposing celebratory fountain, also referred to as a mostra, was renewed by Nicholas V. The architect Leon Battista Alberti was commissioned by him to put up a wall fountain where we now see the wondrous Trevi Fountain. The water which ultimately supplied the Trevi Fountain, as well as the famed baroque fountains in the Piazza del Popolo and Piazza Navona, came from the renovated and modified aqueduct.

Fountains And Their Use In The Minoan Civilization

Fountains and Water and the Minoan Civilization They were used for water supply as well as removal of storm water and wastewater. The principle materials used were rock or clay. When manufactured from terracotta, they were generally in the shape of canals and round or rectangular piping. There are two examples of Minoan terracotta piping, those with a shortened cone shape and a U-shape which have not been observed in any culture since. Clay piping were used to distribute water at Knossos Palace, running up to three meters directly below the flooring. The water pipes also had other applications including amassing water and channeling it to a central site for storing. This required the clay pipes to be suitable for holding water without losing it. Underground Water Transportation: This particular system’s undetectable nature might suggest that it was actually developed for some type of ritual or to allocate water to limited groups. Quality Water Transportation: Given the data, a number of historians advocate that these conduits were not hooked up to the popular water distribution process, providing the residence with water from a different source.

The Elegance of Simple Garden Decor: The Landscape Fountain

Having a pond in the vicinity of your garden water fountain is no longer required because they can now be situated on a wall close by. Digging, installing and cleaning a nearby pond are no longer needed. Due to the fact that this feature is self-contained, no plumbing is necessary. Adding water on a regular } basis is important, however.

Your pond should always contain clean water, so be sure to drain the basin anytime it gets grimy.

Any number of materials can be used to make garden wall features, but stone and metal are the most convenient. The style you are looking for determines which material is best suited to meet your wishes. The best designs for your outdoor wall fountain are those which are handmade, easy to put up and not too big to hang. The water feature you buy needs to be easy to maintain as well. While there may be some cases in which the setup needs a bit more care, generally the majority require a minimal amount of work to install since the only two parts which require scrutiny are the re-circulating pump and the hanging hardware. You can effortlessly liven up your garden with these types of fountains.

The Best Kind of Wall Water Feature for Your Home

A garden wall fountain is ideal when you do not have very much room available. These decorative pieces are quick to put up on any wall surface and do not take up a a great deal of space. It is easy to find the perfect one as they come in a wide variety of prices and styles. Additionally, you can find either decorated or plain ones that come in a variety of sizes. Many people choose these attractive water fountains because they add so much dazzle to their exterior walls. It is also possible to buy more than one fountain for an interesting waterfall sound if you have enough space on your wall.

When it comes time to finding a garden fountain, there are loads of choices available. The type you want and where to mount it are the first things to determine.


Modern Garden Decoration: Large Outdoor Water Fountains and their Roots
Nowadays, fountains adorn public areas and are used to pay tribute to individuals or events and fill recreational and entertainment needs. read more
The Many Construction Materials of Garden Fountains
For people who want the look of a metal fountain but want a lighter weight and more affordable option, fiberglass is the answer. It is simple to clean and maintain a fiberglass water fountain, yet another reason they are trendy. read more
A Small Garden Area? You Can Own a Water Feature too!
Water just mixes into the greenery in your backyard. People will be focused on the pond, artificial river or fountain in your garden. Examples of spots where you can install a water feature include large lawns or small patios. The right accessories and the... read more
Installation of a Fountain In Smaller Backyards
The vegetation in your yard is a great spot to fit in your water feature. Ponds, artificial rivers, or fountains are just some of the ways you can you can make it become... read more