Select from Many Outdoor Wall Fountain Designs

You can create a place to unwind as well as add a touch of style to your porch or yard with a wall fountain since they are excellent adornments to fit into small area. 50025coqn__08059.jpg Conventional, antique, modern, or Asian are just a few of the designs you can pick from when looking for an outdoor wall fountain to your liking. It is possible to have one customized if you are unable to find a pre-assembled fountain to suit you.

There are two distinct sorts of fountains you can buy: mounted and stand-alone. Small, self-contained models can be placed on a wall are known as mounted wall fountains. Wall fountains made of resin (resembling stone) or fiberglass are normally light so they can be easily hung. Floor fountains are freestanding, large, and also have a basin on the ground as well as a flat side against the wall. Typically made of cast stone, these water features have no weight restrictions.

Customized fountains which can be incorporated into a new or existing wall are often recommended by landscaping designers. Employing an expert mason is your best option to build the basin and install the required plumbing. A fountain mask or a spout also needs to be integrated into the wall. A tailor-made wall fountain blends into the landscape instead of standing out because it was a later addition, which adds to a unified appearance.

The Many Construction Materials of Outdoor Water fountains

While today’s garden fountains are made in a variety of materials, the majority are crafted from metal. Metals tend to create clean lines and unique sculptural accents and can fit almost any design theme or budget. The interior design of your residence should set the look and feel of your yard and garden as well.

A common choice today is copper, and it is used in the crafting of many sculptural garden fountains. Copper is trendy for both inside and outside use and is commonly found in tabletop and cascade fountains, among others. Copper fountains also come in a huge array of styles - from fun and eccentric to modern and cutting-edge.

If your style is more old-fashioned, a brass water fountain might work for you. Even though they are a bit old-fashioned, brass fountains are quite popular because they often incorporate interesting artwork.

Of all the metals, stainless steel is seen as the most modern -looking. If you select a cutting-edge steel design, both the value and tranquility of your garden will get a nice bump. As with all fountains, you can get any size you choose.

Because it is both lighter and more affordable than metal but has a similar look, fiberglass is quite common for fountains. Caring for a fiberglass water fountain is relatively easy, another benefit that consumers like.

The Many Reasons to Add a Water Feature

The addition of a wall fountain or an outdoor garden fountain is an excellent way to embellish your yard or garden design. Historical fountains and water features have sparked the interest of modern-day designers as well as fountain designers. You can also reinforce the connection to the past by incorporating one of these to your home's interior design. Among the many properties of these beautiful garden fountains is the water and moisture they discharge into the air which attracts birds and other wild life as well as helps to balance the ecosystem. Flying, bothersome insects, for instance, are scared away by the birds congregating around the fountain or birdbath.

Spouting or cascading fountains are not the best alternative for a small garden since they need a great deal of space. Either a freestanding fountain with an even back and an attached basin set against a fence or a wall, or a wall-mounted kind which is self-contained and hangs on a wall, are some of the options from which you can choose. Be sure to include a fountain mask to an existing wall and a basin to collect the water at the base if you wish to put in a fountain to your living area.

Since the plumbing and masonry work is substantial to complete this type of job, you should hire a specialist to do it rather than attempt to do it alone.

How to Choose the Ideal Spot for Your Water Fountain

When you are choosing a water fountain, be sure to give some thought to where you will place it. They make striking centerpieces in roundabouts and make a lovely impression in driveways and entryways too.

There are models such as wall fountains designed specifically to be hung against a flat surface. They can be mounted against a wall, post, or fence by using a bar or a hook fastened to the back. Since the top part of your fountain is not stable on its own, ensure that it is secure against a wall to avoid damage caused by strong winds, wild animals, or other natural hazards.

Anywhere people come together to sit and take in the fresh air is ideal for another option, a garden sculpture style.

The Multiple Styles of Wall Water Fountains

Having a wall fountain in your garden or on a veranda is ideal when you seek to relax. Even a small space can contain a custom-built one. Whether it is stand alone or fitted, you will need a spout, a water bowl, internal piping, and a pump. You have many models to a lot to choose from whether you are looking for a traditional, contemporary, classical, or Asian style.

Usually quite large, freestanding wall fountains, also referred to as floor fountains, have their basins on the ground.

You can choose to put your wall-mounted fountain on an preexisting wall or build it into a new wall. The appearance of your landscape will seem more unified instead of disjointed when you put in this style of fountain.

Installing a Wall Water Feature in Your House

Enhance nearly any area with the addition of a wall fountain. Peace and relaxation will fill the room due to the comforting sound of the waterfall.

Entryways are common places for wall fountains, but they can also be installed in any common space. The best way to hang one depends on the style, but the standard process is the same. Note that different parts will need to be put together during assembly. First you should attach the base to the upper part, then connect the pump and the tubing. The directions should be read first to make sure it is put together properly. It is typically a straight-forward process. Note, however, that the guidelines for your particular model can vary a bit. Do not hesitate to get someone to assist you to hold the wall fountain in the right spot while you make a tiny mark on the wall. A level is the ideal to ensure it is hung straight. It is suggested to mark both the bottom and the top positions. Your wall fountain can be hung using one of two methods. The first is to utilize screws which you slide directly into the holes on the back. Alternatively, you can affix brackets to the wall and use those. This last one is the more advisable technique, specifically if your fountain is large. Decide where the brackets will go and then mark the appropriate spot on the wall.

Drill pilot holes in the wall for your drywall anchors. Gently tap on the anchors with a hammer to embed them into the wall. Use a cordless drill or a screwdriver to attach the brackets, making sure they are straight. It is then time to place your wall fountain onto the mounting brackets. Check to see that it is in the correct position and safely on the brackets. When you are certain the unit is stable, fill with water. The pump should be fully submerged under water. The water will begin to circulate as soon as you plug in your fountain. The water should fill the basin to within an inch of the top. The basin will overflow when the pump is shut off if it is too full, so be careful not to fill it completely. Whenever the water is not being pumped, it all settles at the bottom causing the water level to rise. Damage can be be the result if the water is overly full and flows down your wall.

Garden Fountains: The Minoan Civilization

During archaeological digs on the island of Crete, many kinds of conduits have been identified. In conjunction with offering water, they dispersed water which amassed from storms or waste. The primary ingredients employed were rock or terracotta. There were clay pipelines, both circular and rectangular as well as pathways made from the same materials.

There are two illustrations of Minoan terracotta conduits, those with a shortened cone form and a U-shape which haven’t been seen in any society since. The water provision at Knossos Palace was managed with a strategy of terracotta pipes which was put under the floor, at depths varying from a couple of centimeters to a number of meters. The piping also had other functions such as amassing water and diverting it to a main area for storing. In order to make this possible, the pipelines had to be tailored to handle: Subterranean Water Transportation: It is not really known why the Minoans wanted to transport water without it being noticed. Quality Water Transportation: The water pipes may furthermore have been used to move water to water fountains which were distinct from the city’s normal process.

The Best Kind of Wall Fountain for Your Needs

When you are limited on room, a garden wall fountain is an ideal answer. These works of art will not take up much room and are easy to install on any wall. Prices range from cheap to expensive and there are many types available so everyone should be able to find the ideal design for them. There is also a variety of colors and sizes on the market. Many people go for these charming water fountains because they add so much charm to their outside walls. You can even buy more than one fountain for an interesting waterfall sound if you have enough space on your wall.

When it comes time to finding a garden fountain, there are lots of choices available. The type you want and where to install it are the first things to figure out.

The History of Outdoor Fountains

As the leader of the Catholic Church, the scholarly Pope Nicholas V (1397-1455} decided to commission translations of important writings from their original Greek into Latin. Continuing in his quest to make the city deserving of being called the capital of the Christian world, he decided to enhance the beauty of the city as well. Beginning in 1453, the ruined Aqua Vergine, an historical Roman aqueduct which had brought clean drinking water into the city from many miles away, underwent reconstruction at the behest of the Pope. Nicholas V also undertook the building of mostras, an old Roman tradition of putting up imposing public fountains to indicate the terminal point of an aqueduct. The Trevi Fountain now occupies the area formerly filled with a wall fountain crafted by Leon Battista Albert, an architect commissioned by him. The water which ultimately provided the Trevi Fountain, as well as the renown baroque fountains in the Piazza del Popolo and Piazza Navona, came from the renovated and altered aqueduct.


Backyard Elegance: Wall fountains
Stone and metal are most common elements employed to make garden wall fountains even though they can be made of other materials as well. You need to know the look you are... read more
The Various Construction Materials of Outdoor Fountains
Fiberglass is a popular material for fountains because you can get the look and feel of metal at a much lower price, and it is lightweight and easier to... read more
Outdoor Water fountains: An Ideal Decor Accessory to Find Serenity
Your mood is positively influenced by having water in your garden. The sounds of a fountain are perfect to block out the noise in your neighborhood or in the city where you live. This is a great spot to relax and experience the natural world near... read more
Garden Fountains: The Perfect Decor Accessory to Find Serenity
You can find peace and tranquility by just having water in your garden. The sounds of a fountain are perfect to block out the noise in your neighborhood or in the city where you reside. This is a great spot to relax and experience nature ... read more
Large Outdoor Fountains: An Ideal Decor Accessory to Find Peace
Your state of mind is favorably influenced by having water in your garden. The noise in your neighborhood can be masked by the delicate sounds of a... read more