Your Patio: A Great Place for a Fountain

A great way to enhance the appeal of your outdoor living area is to add a wall fountain or an exterior garden fountain to your landscaping or garden design. A myriad of current designers and fountain artisans have found inspiration in the fountains and water features of the past. twfs016__70671.jpg As such, the effect of adding one of these to your interior decor bridges it to past times. In addition to the positive characteristics of garden fountains, they also generate water and moisture which goes into the air, thereby, attracting birds as well as other creatures and harmonizing the environment. For instance, irritating flying insects are usually deterred by the birds attracted to the fountain or birdbath.

Putting in a wall fountain is your best option for a little backyard because a spouting or cascading fountain occupies too much space. There are two types of fountains to pick from including the freestanding model with a flat back and an attached basin set up against a fence or a wall in your yard, or the wall-mounted, self-contained version which is suspended directly on a wall. A water feature can be added to an existing wall if you include some type of fountain mask as well as a basin to gather the water below. Since the plumbing and masonry work is substantial to complete this type of job, you should employ a specialist to do it rather than try to do it alone.

Select from Many Exterior Wall Fountain Designs

If you want to create a place to relax and add some pizzazz to a small area such as a patio or courtyard, wall fountains are perfect because they do not occupy much space. When looking at the many types of outdoor wall fountains available including traditional, vintage, contemporary, or Asian, you are certain to find one best suited to your design ideas. While there are innumerable prefabricated ones on the market, you may need a customized fountain if none of these are appealing to you.

Depending on your requirements, you can select from mounted or freestanding types. Little, self-contained mounted wall fountains can be hung on any surface. One of the most important features of wall fountains is that they be light, so they are typically made of fiberglass or resin to mirror the look of stone. In large stand-alone fountains, otherwise referred to as wall fountains, the basin is situated on the ground with the smooth side positioned against a wall. There are no weight restrictions on these sorts of cast stone water features.

It is a good idea to integrate a custom-made fountain into a new or existing wall, something often suggested by landscape professionals. A professional mason is necessary to place the water basin against the wall and properly install all the plumbing inside or behind the wall. It is also essential to include a spout or fountain mask to build it into the wall.

The unified look provided by custom-made wall fountains make them appear to be part of the scenery instead of an afterthought.

The Subtle Charm of the Water Wall Fountain

Introducing a wall fountain as a design element will make a wonderful impression on your family and friends. The dazzling grandeur a wall water feature lends to any place is in addition to the gentle background sounds it produces. Guests will walk away with a memorable impression of the delightful sights and relaxing sounds eminating from it.

A wall fountain can contribute a great deal of elegance, even to contemporary living areas. Also available in modern-day materials such as stainless steel or glass, they can add flair to your interior decor. Does your home or business have a restricted amount of space? The ideal option for you is a wall water fountain. Since they are hung on a wall you can save your priceless real estate for something else.

Commercial buildings with busy lobbies generally have one of these fountains. You can also mount wall fountains outside. Exterior wall water features can be made of fiberglass or resin. Courtyards, patios, or other outdoor spaces needing a stylish touch should include a water fountain made of one of these waterproof materials.

Wall fountains can be manufactured in a variety of different designs ranging from contemporary to classic and provincial. The type you pick for your space is dictated by your individual design preferences. The kind of material used depends on the type of space which needs to be decorated such as slate for a traditional lodge or sleek glass for a contemporary residence. The material you get depends solely on your design ideas. There is no doubting the fact that fountains are features which delight visitors and add to your quality of life.

The Use of Water Fountains As Water Elements

The description of a water feature is a large element which has water flowing in or through it. A simple hanging fountain or an elaborate courtyard tiered fountain are just two varieties from the broad range of articles available.

The versatility of this feature is practical since it can be situated indoors or outdoors. Water features comprise ponds and swimming pools as well.

Garden wall fountains are worthwhile additions to your living areas such as backyards, yoga studios, cozy patios, apartment verandas, or office complexes. In addition to helping you kick back, both sight and sound are enticed by the soothing sounds of a water feature. Their noticeably satisfying design contributes to the embellishment of any space as well. The water’s comforting sounds contribute to a feeling of tranquility, drown out disagreeable noises, and provide a wonderful water display.

Setting Up and Maintaining Outdoor Water fountains

Setting up an outdoor wall fountain requires that you take into account the dimensions of the space where you are going to place it. A strong wall is definitely needed to hold up its overall weight. Areas or walls that are smaller will require a lightweight fountain. In order for the fountain to have electrical power, a nearby electrical socket is needed. Whatever the style of outdoor wall fountain you select, they generally come with easy to follow, step-by-step instructions.

The general outdoor wall feature is available in an easy-to-use kit that comes with everything you need and more to properly install it. A submersible pump, hoses and basin, or reservoir, are included in the kit. Depending on its size, the basin can typically be hidden quite easily amongst the plants. Once your wall fountain is installed, all that is needed is regular cleaning and some light maintenance.

It is essential to replenish the water consistently so that it stays clean. Rubbish such as branches, leaves or dirt should be cleared away quickly. Protecting your outdoor wall fountain from the freezing winter weather is essential. Bring your pump inside when the weather turns very cold and freezes the water so as to avoid any possible harm, like as cracking. All in all, an outdoor wall fountain can last for any number of years with proper upkeep and cleaning.

Easy-to-Fallow Tips to Install a Wall Fountain

Improve virtually any room with the addition of a wall fountain.

The calming sound of the waterfall will de-stress and comfort. People tend to hang their wall fountains in entryways, but, in fact, they can be a wonderful addition to any room where everyone meets. Although the instructions for installing one are fairly straightforward there will be minor modifications depending on the model. Bear in mind that different parts will need to be put together during assembly. The base and the upper portion will need to be put together as well as the pump and the tubing. Be sure to review the instruction manual before starting to make sure it is done correctly. In general, it is simple and easy. Note, however, that the guidelines for your specific model can vary a bit. Do not hesitate to get someone to assist you to position the wall fountain in the right place while you make a tiny mark on the wall. To guarantee it will be straight, use a level. Draw your marks at both the top and the bottom. Wall fountains can be installed in a couple of ways. You will see holes on the back side of the wall fountain which can be hung directly onto the screws. Alternatively, you can attach brackets to the wall and use those. This last one is the more advisable method, specifically if your fountain is large. Determine where the brackets will go and then mark the appropriate spot on the wall. Bore pilot holes in the wall wherever you need to place the drywall anchors. Gently tap on the anchors with a hammer to insert them into the wall. Use a cordless drill or a screwdriver to install the brackets, making sure they are level. It is then time to hang your wall fountain onto the mounting brackets. Check to see that it is in the proper position and secure on the brackets. If the alignment is acceptable, it’s time to add water.

The pump should be totally immersed under water. Plug the pump into the wall and watch the water begin to move. Gently pour in more water until it comes within an inch of the top of the basin. Be attentive not to fill it totally to the top or it will overflow when you turn off the pump. Whenever the water is not being pumped, it all settles at the bottom part causing the water level to rise. Whenever there is too much water, it will spill out and can harm your floor and furniture.

Wall Water Features: So Many Choices to Choose From

When you are limited on room, a garden wall fountain is an ideal option. These decorative pieces are quick to put up on any wall surface and do not take up a lot of space. Prices range from cheap to expensive and there are countless designs available so everyone should be able to find the best model for them. There is also a range of colors and sizes on the market. A lot of homeowners who hope to add some style to the exterior walls of their house get one of these alluring water fountains. If there is sufficient wall space, you might think about buying multiple fountains as they will produce a lovely waterfall effect.

Garden fountains come in a large range of options from which to pick. Two of the main things to be established are which style to purchase and where to install it.

What Are Outdoor Fountains Created From?

Garden fountains today are typically made from metal, though you can find them in other materials too. Metallic fountains, with their clean lines and sculptural accents, come in in a range of metals and can accommodate any style or budget. If you have a modern-day look and feel to your interior design, your yard and garden should have that same style.

One of the most popular metals for sculptural garden fountains these days is copper. Copper fountains are the best choice because they are perfect for the inside and outside. Copper is also adaptable enough that you can select a range of styles for your fountain, from contemporary to whimsical.

Also common, brass fountains often have a more old-fashioned style to them versus their copper counterpart. You will see a lot of brass fountains, as their intricate artwork makes them trendy even if they are on the more traditional side.

Of all the metals, stainless steel is recognized as the most contemporary-looking. If you select a cutting-edge steel design, both the value and tranquility of your garden will get a nice boost. Like other water features, they come in a variety of sizes.

Fiberglass fountains are well liked because they look similar to metal but are more affordable and much easier to move around. Keeping a fiberglass water fountain clean and working properly is quite simple, another aspect consumers love.

How to Select the Ideal Place for Your Water Feature

One of the first things to ponder when picking a water fountain is exactly where you intend to put it. The entrance to a hotel or building is a wonderful spot for them, as they offer a lovely welcome to guests.

It is also possible to buy a fountain made especially to be placed against a wall. To attach one against a wall, look for a bar or hook on the back made exactly for this purpose. Such fountains are not stable on their own, therefore, be sure to secure it right away so that it does not topple over as a result of weather conditions, animals or other natural occurrences.

A typical place to add a garden sculpture is traditionally in areas where people gather to relax and enjoy the scenery.


Caring For Fountains
In order to avoid any damage, such as cracking, from freezing water during the cold winter months, move your pump inside. Simply put, your outdoor fountain will be around for many years to come with the correct care and maintenance. read more
Taking Care Of Wall fountains
Replenish and clean the water on a regular basis. It is important to promptly get rid of debris such as leaves, twigs or other dreck. Additonally, outdoor fountains should always be... read more
Caring For Garden Water fountains
Replace and clean the water on a regular basis. Leaves, branches or dirt are examples of debris which should be cleared away quickly. In addition, your outdoor wall... read more